Thermal and evolved gas analyses of the oxidation of a cellulose/copper(II) oxide mixture

Cellulosic biomass is a promising alternative energy resource from the viewpoint of sustainability. The use of waste materials as cellulosic biomass could additionally contribute to a recycling society. It is thus essential to develop safer processes in order to expand utilization of cellulosic biomass as a useful resource in the future. For example, in some cases, construction wastes contain wood preservatives, including metal oxides that can act as catalysts for the oxidation of organic materials. Copper(II) oxide (CuO) is a major component in wood preservatives and is known to catalyze the oxidation of cellulose. There is, therefore, possibility for spontaneous ignition within large piles of wood chips from construction wastes. In this study, we focused on the thermal behavior of a cellulose/CuO mixture, measured using a Calvet-type heat flux calorimeter. In addition, Fourier transform infrared spectroscopy and gas chromatography were applied to analyze the oxidative decomposition gases of the cellulose/CuO mixture, and a reaction mechanism was proposed. It was revealed that CuO promotes the oxidative decomposition of cellulose and increases the quantity of the gases that evolved from cellulose with a catalytic cycle. The influence of CuO on oxidation of cellulose is greater at lower temperatures and spontaneous ignition, fires, and explosions are likely to increase when wood chips containing CuO are stored for long periods of time.     

On-off scheduling schemes for power-constrained electric vehicle charging

In this paper, we study the problem of establishing a dynamic charging schedule of electric vehicles (EVs) at a charging station, assuming that limited power implies that only a limited number of EVs can charge simultaneously. The only control we assume to be available to the charging station is the ability to (at any given time) turn on or off the power supply to any EV, with this tool we want to develop a charging schedule that will satisfy the energy demands of the EVs in their intended deadlines. We propose two distinct approaches to this problem: a discretized time version, based on a greedy-like algorithm, and a continuous time version, based on linear programming. We compare these two approaches and numerically study the improvement they yield in the efficiency of the charging procedure, when applied to simulated data based on real parking data. Finally, we illustrate the flexibility of the models by sketching several possible extensions.     

Study of flame-retardant finishing of cellulose fibres: Organic–inorganic hybrid versus conventional organophosphonate

The aim of this study was to introduce a non-formaldehyde inorganic–organic hybrid sol–gel flame-retardant precursor (SiOP) containing phosphorous, nitrogen, and silicon and to compare its functional properties with those of the conventional formaldehyde-containing organic flame-retardant agent, organophosphonate (OP). SiOP was used at concentrations of 2%, 4%, and 8%, and OP was used at a concentration of 200 g/dm³. Both agents were applied to 100% cotton (CO) woven fabric by the pad-dry-cure method under the appropriate conditions. The presence of the SiOP and OP coatings on the CO fabric was confirmed by scanning electron microscopy, energy dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The results of the vertical tests of flammability and the thermogravimetric analyses showed that the presence of the SiOP coating changed the thermal degradation pathway of the CO fabric and resulted in an increase in the thermo-oxidative stability of the cellulose fibres. The thermo-oxidative stability was enhanced by the addition of higher amount of dry solids. At comparable dry solids contents, OP preserved significantly greater flame retardancy and thermo-oxidative stability than did SiOP. These results indicated that the SiOP precursor could not act as an effective alternative to the OP agent in the flame-retardant protection of CO fabric.     

Malva sylvestris L. extract suppresses desferrioxamine‐induced PGE2 and PGD2 release in differentiated U937 cells: the development and validation of an LC‐MS/MS method for prostaglandin quantification

Malva sylvestris is a species used worldwide as an alternative to anti‐inflammatory therapies; however, its mechanism of action remains unknown. In this paper, the anti‐inflammatory effects of M. sylvestris alcoholic extracts were evaluated by measuring the pro‐inflammatory mediators PGE₂ and PGD₂ in desferrioxamine‐stimulated phorbol 12‐myristate 13‐acetate‐differentiated U937 cells. An HPLC‐DAD fingerprint of the M. sylvestris extract was performed and caffeic acid, ferulic acid and scopoletin were identified and quantified. An HPLC‐MS/MS method was developed and validated to separate and measure the prostaglandins. The lower limits of detection (~0.5 ng/mL for PGE₂ and PGD₂) and quantification (1.0 ng/mL for PGE₂ and PGD₂) indicated that the method is highly sensitive. The calibration curves showed excellent coefficients of correlation (r > 0.99) over the range of 1.0–500.0 ng/mL, and at different levels, the accuracy ranged from 96.4 to 106.4% with an RSD < 10.0% for the precision study. This method was successfully applied using U937‐d cells. A significant dose‐dependent reduction of PGE₂ and PGD₂ levels occurred using 10 µg/mL (10.74 ± 2.86 and 9.60 ± 6.89%) and 50 µg/mL of extract (48.37 ± 3.24 and 53.06 ± 6.15%), suggesting that the anti‐inflammatory mechanisms evoked by M. sylvestris may be related to modulation of these mediators. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface properties of sensors based on aminophenol-polymerized film

In this work, carbon electrodes modified with aminophenols were developed for the production of pesticides biosensors based on acetylcholinesterase. The polymers were potentiodynamically deposited on a graphite electrode surface by the oxidation of monomers, 2-aminophenol, 3-aminophenol and 4-aminophenol. The electrochemical behaviour and surface analysis of the electrodes modified by polyaminophenols non-immobilized and immobilized on acetylcholinesterase were studied by cyclic voltammetry, electrochemical impedance spectroscopy and atomic force microscopy. Roughness values obtained for graphite electrodes modified with poly(4-aminophenol) and poly(4-aminophenol)/acetylcholinesterase were 174 and 86 nm, respectively. The acetylcholinesterase enzyme was immobilized on a graphite and a graphite modified with poly(4-aminophenol), and these electrodes were coupled in the flow system. Potentiometric response due to hydrogen ions generated by an enzymatic system in the presence of acetylcholine chloride substrate was evaluated. The results showed that the graphite/poly(4-aminhophenol) sensor presents high sensitivity to hydrogen ions when compared with other graphite/polyaminophenols sensors. The biosensor coupled in a continuous flow system was employed for the detection of dichlorvos. The detection and quantification limits were 0.8 and 2.4 μmol L⁻¹ dichlorvos, respectively. This sensor reveals an efficient and promising material for biomolecules immobilization.     

Noncovalent Intermolecular Interaction in Cofacially Stacked 24π Antiaromatic Hexaphyrin Dimer

π–π Stacking is omnipresent not only in nature but in a wide variety of practical fields applied to our lives. Because of its importance in a performance of natural and artificial systems, such as light harvesting system and working layer in device, many researchers have put intensive effort into identifying its underlying nature. However, for the case of π–π stacked systems composed of antiaromatic units, the understanding of the fundamental mechanisms is still unclear. Herein, we synthesized a new type of planar β,β’-phenylene-bridged hexaphyrin (1.0.1.0.1.0), referred as naphthorosarin which possesses the 24π-electron conjugated pathway. Especially, the corresponding antiaromatic porphyrinoid shows the unique property to form dimeric species adopting the face-to-face geometry which is unprecedented in cases of known annulated naphthorosarins. In order to elucidate the intriguing properties derived from the stacked dimer, the current study focuses on the experimental support to rationalize the observed π–π interactions between the two subunits.     

The role of TDP-43 propagation in neurodegenerative diseases: integrating insights from clinical and experimental studies

TAR DNA-binding protein 43 (TDP-43) is a highly conserved nuclear RNA/DNA-binding protein involved in the regulation of RNA processing. The accumulation of TDP-43 aggregates in the central nervous system is a common feature of many neurodegenerative diseases, such as amyotrophic lateral sclerosis (ALS), frontotemporal dementia (FTD), Alzheimer’s disease (AD), and limbic predominant age-related TDP-43 encephalopathy (LATE). Accumulating evidence suggests that prion-like spreading of aberrant protein aggregates composed of tau, amyloid-β, and α-synuclein is involved in the progression of neurodegenerative diseases such as AD and PD. Similar to those of prion-like proteins, pathological aggregates of TDP-43 can be transferred from cell-to-cell in a seed-dependent and self-templating manner. Here, we review clinical and experimental studies supporting the prion-like spreading of misfolded TDP-43 and discuss the molecular mechanisms underlying the propagation of these pathological aggregated proteins. The idea that misfolded TDP-43 spreads in a prion-like manner between cells may guide novel therapeutic strategies for TDP-43-associated neurodegenerative diseases.Subject terms: Neurodegenerative diseases, Neurodegeneration